show ip ospf interface-process
Except on the first page, right running head:
Heading1 or Heading1NewPage text (automatic)
497
Alcatel-Lucent
Beta
Beta
OmniAccess 700 CLI Command Reference Guide
SHOW
IP
OSPF
INTERFACE
-
PROCESS
show ip ospf interface-process
[{
GigabitEthernet
|
Serial
} <
slot/
port
>|
Loopback
<
0-14487
>}]
D
ESCRIPTION
Enter this command in Super User mode or Router Configuration mode. This
command displays the interface-process table.
P
ARAMETERS
E
XAMPLE
ALU(config-router ospf 20)#show ip ospf interface-process
Interface-Process Table:
-------------------------------------------------------
Interface Attached Process Waiting Process
GigabitEthernet7/0 20 -
GigabitEthernet7/0 20 -
loopback 9 - -
loopback1 - -
Transmit Delay
Interface transmit delay, interface state,
and router priority.
Designated Router
Designated router ID and respective
interface IP address.
Backup Designated Router
Backup designated router ID and
respective interface IP address.
Timer intervals configured
Configuration of timer intervals.
Hello
Number of seconds until next hello
packet is sent out this interface.
Neighbor Count
Count of neighbors and list of adjacent
neighbors on an interface.
Message Digest Authentication
Type of authentication enabled on an
interface.
Parameter
Description
{
GigabitEthernet
|
Serial
}
<
slot/port
>
Loopback
<
0-14487
>
Interface name with its slot and port
number.
Parameter
Description
