Network Address Translation
Left running head:
Chapter name (automatic)
576
Beta
Beta
OmniAccess 700 CLI Command Reference Guide
Alcatel-Lucent
SOURCE
-
NAT
STATIC
[
<1-65535>
]
match
[{
all
|
any
}] <
match-list name> source-nat
static
D
ESCRIPTION
Enter this command in the NAT configuration mode. This command is used to
configure a static SNAT that uses one-to-one address mapping without port
translation.
Note:
If no address is configured, the IP address of the egress interface on which the NAT
policy is applied will be used.
P
ARAMETERS
D
EFAULT
V
ALUE
By default, NAT enables dynamic mapping.
E
XAMPLE
ALU(config-nat-N1)# match m1 source-nat static
Parameter
Description
1-65535
The range for the NAT policy rule. This rule number signifies
the priority of a rule.
match
[{
all
|
any
}]
<
match-list
name>
This command forms a match-list of the Common
Classifiers that are pre-configured. In this type of match, the
relevant action is performed even if one rule in the list is
satisfied.
source-nat
Type of NAT, here it is the SNAT.
static
Use this keyword to use the static NAT.
