Agilent Technologies 8719D User Manual Download

Page: 44 / 673

also indicated by a small triangle adjacent to the graticule, at the left for channel 1 and at

the right for channel 2 in Cartesian formats.

12.

Marker Values.

These are the values of the active marker, in units appropriate to the

current measurement. (Refer to “Using Analyzer Display Markers” in the “Making

Measurements” chapter.)

13. Marker Stats, Bandwidth.

These are statistical marker values that the analyzer

calculates when you access the menus with the

key. (Refer to “Using Analyzer

Display Markers” in the “Making Measurements” chapter.)

14.

Labels.

These menu labels

the function of the

that are located

to the right of the analyzer display.

15.

During limit testing, the result will be annunciated as PASS if the limits are not

exceeded, and FAIL if any points exceed the limits.

HP 87

Oessription and Options

Summary of Contents for 8719D


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8719D

Reviews:

Related manuals for 8719D

Brands by name

Popular brands

Agilent Technologies 8719D, User Manual

Search results

Summary of Contents for 8719D

Reviews:

Related manuals for 8719D

Brands by name

Popular brands