Agilent Technologies 8719D User Manual Download

Page: 643 / 673

The

Data Format and Keyword Reference

This appendix contains the following information:

The

Data Format

Description and Overview

Definition Of

Terms

Examples

The

Keyword Reference.

The

Data Format

Description and Overview

CITIflle is a standardized data format, used for exchanging data between different computers

and instruments.

is an abbreviation for “Common Instrumentation Transfer and

Interchange

This standard has been a group effort between instrument designers and

designers of computer-aided design programs. As much as possible, CITIfile meets current needs

for data transfer, and it was designed to be expandable so it can meet future needs
CITIfile

how the data inside an ASCII package is formatted. Since it is not tied to any

particular disk or transfer format, it can be used with any operating system (BASIC, DOS,

UNIX, etc), with any disk format (LIF, DOS, 1, etc), or with any transfer mechanism (disk,

LAN, GPIB, etc).
By careful implementation of the standard, instruments and software packages using CITIfile

are able to load and work with data created on another instrument or computer. It is possible,

for example, for a network analyzer to directly load and display data measured on a scalar

analyzer, or for a software package running on a computer to read data measured on the

network analyzer.

Data Formats

There are two main types of data formats: binary and ASCII.

uses the ASCII text

format. While this format does take up more bytes of space than a binary format, ASCII data

is a transportable, standard type of format which is supported by all operating systems In

addition, the ASCII format is accepted by most text editors. This allows

to be created,

examined, and edited easily, making

easier to test and debug.

File and Operating System Formats

CITIfile was designed to be independent of the data storage mechanism, and therefore may

be implemented for any file system. However transfer between systems may sometimes

be necessary. Any commercially available software that has the ability to transfer ASCII files

between systems may be used to transfer

data.

The

and Keyword Reference A-l

Summary of Contents for 8719D


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8719D

Reviews:

Related manuals for 8719D

Brands by name

Popular brands

Agilent Technologies 8719D, User Manual

Search results

Summary of Contents for 8719D

Reviews:

Related manuals for 8719D

Brands by name

Popular brands