Agilent Technologies 8719D, User Manual

Page: 650 / 673

VAR_LIST_BEGIN
VAR_LIST_END
VAR_LIST_BEGIN indicates that a of the values for the independent
variable (declared in the VAR statement) follow. Only the MAG format
is supported in revision
VAR_LIST_END
the end of a of values for the independent
variable.
DATA
CONSTANT
DATA S RI the name of an array of data that be read
later in the current package, and the format that the data
be in. Multiple arrays of data are supported by using standard array
indexing. Versions and of support the
RI and imaginary) format, and a maximum of two array indexes.
Commonly used array names include the following:
for parameter” Example:
“E” for “Error term” Example: E[
“USER” for “User parameter” Example:
Example: 1]
“VOIXAGE_RATIO” for a ratio of two Example:
voltages (AR).
CONSTANT [name] [value] allows for the recording of values which
don’t change when the independent variable changes.
are part of the main Users must not
their own Use the #KEYWORD device
to create your own KEYWORD instead. The #NA device specification is
an example of this
No constants were defined for revision
of
revision the following constant:
CONSTANT TIME [year] [month] [day] [hour] [min]
Example:
CONSTANT 1991 02 26 17 33 53.25
n
The COMMENT statement is not absolutely required, but is highly
recommended to aid readability.
n
The year should always be the four digits 1991” is correct, but
“91” is not). This is to avoid problems with the year 2000, when the
shortened version of the year be “00.”
n
The hour should be in time.
When writing a and the fractional seconds value is zero, then
the “seconds” may be printed either with or without a decimal
point: either “47.0” or “47” be acceptable. When reading
a the seconds should always be read as if it were a
floating point number.
The Data Format and byword Reference