Agilent Technologies 8719D User Manual Download

Page: 191 / 673

View Plot Files on a PC

Plot files can be viewed and manipulated on a PC using a word processor or graphics

presentation program. Plot

contain a text stream of HPGL (Hewlett-Packard Graphics

Language) commands. In order to import a plot into an application, that application

have an import filter for HPGL (often times call HGL). Two such applications from the Lotus@

suite of products are the word processor

and the graphics presentation package

“keelance Graphics.

Lotus applications are not supported by Hewlett-Packard. The following

procedures are provided for informational use only. Other applications or other

versions of the same application may function differently.

When viewed in such programs, the color and font size of the plot may vary from the output

of an

compatible color printer. The following table shows the differences between

the color assignments of

compatible printers and Lotus applications. Also refer to

“Selecting Pen Numbers and Colors” located earlier in this chapter.

Printer

Applications

Pen Color

No. No.

White

1 1

I I

black

red

(red-violet)

blue

4 yellow 4

6 red 6

black 7

green

yellow

blue

red-violet

To modify the color or font size, consult the documentation for the particular application being

used.

Printing, Plotting, and Saving Measurement Results

Summary of Contents for 8719D


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8719D

Reviews:

Related manuals for 8719D

Brands by name

Popular brands

Agilent Technologies 8719D, User Manual

Search results

Summary of Contents for 8719D

Reviews:

Related manuals for 8719D

Brands by name

Popular brands