Agilent Technologies 8719D User Manual Download

Page: 209 / 673

f. Press (Local) and select one of the following:

Choose

to allow the computer controller to be involved in all

peripheral access operations.

Choose

to allow yourself to control the analyzer over HP-IB and also

. . . . . . . . . . . . .

allows the analyzer to take or pass control.

. . . .

. .

4 .

. . . . . . . . . . . . . . . . .

the save by selecting one of the following choices:

to disk in

bit real format (for

disks), and 32 bit PC format for DOS disks This

makes the DOS data files half the size of the LIF files.

Selecting

store data to disk in the

ASCII data format.

. .

See “ASCII Data Formats”

for information on using display graphics) The

measurement display is not saved with this selection. (Refer to the information located

earlier in this chapter for a procedure that shows you how to plot measurement displays to

disk.)

. .

Selecting

will override all of the other save options. Because

this type of data is only intended for computer manipulation, the contents

. .

6. Choose the type of format you want:

. .

. . . . . . . . .

import the information into a spread sheet format.

4-38

Printing, Plotting, and Saving Measurement Results

Summary of Contents for 8719D


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8719D

Reviews:

Related manuals for 8719D

Brands by name

Popular brands

Agilent Technologies 8719D, User Manual

Search results

Summary of Contents for 8719D

Reviews:

Related manuals for 8719D

Brands by name

Popular brands