Agilent Technologies 8719D User Manual Download Page 39

Page: 39 / 673

Front Panel Features

Figure l-l.

Front Panel

l-l shows the location of the following front panel features and key function blocks.

These features are described in more detail later in this chapter, and in the “Key

chapter.

4.
5.

switch.

This switch controls ac power to the analyzer. 1 is on, 0 is off.

Display.

This shows the measurement data traces, measurement annotation, and

labels. The display is divided into specific information areas, illustrated in

Disk drive.

This 3.5 inch drive allows you to store and recall instrument states and

measurement results for later analysis.

Softkeys. These

keys provide access to menus that are shown on the display.

STIMULUS function block. The

keys in this block allow you to control

analyzer

source’s frequency, power, and other stimulus functions.

RESPONSE function block. The

keys in this block allow you to control the measurement

and display functions of the active display channel.

CHANNEL

keys, The

analyzer has two independent primary channels and two

auxiliary channels. These keys allow you to select the active channel. Any function you

enter applies to

the

selected active channel.

Options

Summary of Contents for 8719D


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8719D

Reviews:

Brands by name

Popular brands

Agilent Technologies 8719D, User Manual

Search results

Summary of Contents for 8719D

Reviews:

Brands by name

Popular brands