Agilent Technologies 8719D User Manual Download

Page: 609 / 673

Transistor

Fixtures

The following Hewlett-Packard transistor test fixture is compatible with the HP

Additional test fixtures for transistors and other devices are available from Inter-Continental

Microwave. order their catalog, request HP literature number 5091-4254E. Or contact

Inter-Continental Microwave as

1515 Wyatt Drive

Santa Clara, CA 95054-1524

(tel) 408 727-1596

(fax) 408 727-0105

Transistor

Fixture Kit

This

kit can be used to test and characterize

packaged microwave transistors.

It includes inserts that accept 70 and 100

transistor packages, and is capable of making

measurements from dc to 18

Short and through verification devices are included.

The appropriate

adapter set, cables, and calibration kit

have be ordered to

the

analyzer to interface with the HP

precision

connectors. lb be useful, this fixture

kit must

be used with the HP

active device measurement software.

Bias Supplies and Networks

Bias supplies

Bias supplies can be used for

biasing with the network analyzer. The HP

Bias

Interconnect Cable is recommended for use with the following bias supplies.

Precision DC Power Supply

This power supply can provide a maximum of 50 V at 2 A.

Modular DC Source/Monitor

This power supply can provide a maximum of 200 V at 10 A.

114 Compatible Peripherals

Summary of Contents for 8719D


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8719D

Reviews:

Related manuals for 8719D

Brands by name

Popular brands

Agilent Technologies 8719D, User Manual

Search results

Summary of Contents for 8719D

Reviews:

Related manuals for 8719D

Brands by name

Popular brands