Agilent Technologies 8719D, User Manual

Page: 52 / 673

4.
set the span to 3 press:
Note
You could also press the and keys and enter the frequency range
limits as start frequency and stop frequency values.
Setting the Source Power.
5.
To change the power level to -5 press:
Note
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
power ranges, to keep the power setting within the defined range.
Setting the Measurement.
6. To change the number of measurement data points to 101, press:
7. select the transmission measurement, press:
8. view the data trace, press:
Step 3. Perform apply the appropriate error-correction.
9. Refer to the “Optimizing Measurement Results” chapter for procedures on correcting
measurement errors.
10. save the instrument state and error-correction in the analyzer internal memory, press:
Step 4. Measure the device under test.
11. Replace any standard used for error-correction with the device under test.
12. measure the insertion loss of the
press:
Step Output the measurement results.
13. To create a hardcopy of the measurement results, press:
Refer to the “Printing, Plotting, and Saving Measurement Results” for procedures on how
to define a print, plot, or save. For information on a peripheral, refer to the
“Compatible Peripherals” chapter.
24 Making Measurements