Agilent Technologies 8719D, User Manual

Page: 496 / 673

supplies a name for the saved and or data file. Brings up
the TITLE MENU.
provides access to the utilities menu.
the load in a calibration kit as a (not sliding) load.
is used only with a polar or Smith format. It changes the
auxiliary response value of the
marker. This is the second
part of a complex data pair, and applies to a magnitude/phase
marker, a real/imaginary marker, an R +
marker, or a G +
marker. Fixed marker auxiliary response values are always
uncoupled in the two channels.
To read absolute active marker auxiliary values following a
. . . . . . . . . . . . . .
eration, the
value can be reset to zero.
leads to the marker menu, where the stimulus and
response values for a reference marker can be set
arbitrarily.
changes the stimulus value of the marker. Fixed marker
stimulus values can be different for the two channels if the
channel markers are uncoupled using the marker mode menu.
read absolute active marker stimulus values following a
changes the response value of the marker. In a Cartesian
format this is the y-axis value. In a polar or Smith chart format
with a magnitude/phase marker, a real/imaginary marker, an
R+
marker, or a G+ marker, this applies to the part of
the complex data pair. Fixed marker response values are always
uncoupled in the two channels.
read absolute active marker response values following a
. . . . . .
operation, the response value can be reset to zero.
.. .. . . . . . . . .
defines a flat limit line segment whose value is constant with
frequency or other stimulus value. This line is continuous
to the next stimulus value, but is not joined to a segment
with a different limit value. If a flat line segment is the final
segment it terminates at the stop stimulus A flat line segment
is indicated as FL on the table of limits
puts a form feed command into the display title.
presents a menu used to select the display format for the data.
Various rectangular and polar formats are available for display
of magnitude, phase, impedance, group delay, real data, and
SWR.
specifies whether or not to store the formatted data on disk
with the instrument state.
brings up a menu for formatting a disk.
causes subsequent disk initialization to use the disk format.
causes subsequent disk initialization to use the disk format.
.
Definitions 5