manualshive.com logo in svg

Agilent Technologies 8719D, User Manual

Share
Download
Agilent Technologies 8719D User Manual Download Page 583

DOS NAME LIMITED TO 8 CHARS+ 3 CHAR EXTENSION

Error Number A DOS 

 name must meet the following criteria:

180

n 

minimum of 1 character

n 

format is 

q 

maximum of 8 characters in the filename

q 

maximum of 3 characters in the extension field (optional)

q 

a dot separates the filename from the extension field (the dot is not part of

the name on the disk)

DUPLICATING TO THIS SEQUENCE NOT ALLOWED

Error Number A sequence cannot be duplicated to itself.

125

 STANDARDS PER CLASS

Error Number When modifying calibration kits, you can 

 a maximum of seven standards

72 

for any class.

EXTERNAL SOURCE MODE REQUIRES CW TIME

Error Number An external source can only be phase locked and measured in the CW time

148 sweep mode.

Error Number There is a hardware problem with the HP 

 external source. Verify the

191 connections between the analyzer and the external source. If the connections

are correct, refer to the source operating manual.

EXTSRC: NOT ON/CONNECTED OR WRONG ADDR

Error Number The analyzer is unable to communicate with the external source. Check the

162 connections and the HP-IB address on the source.

 

Summary of Contents for 8719D


































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands