Agilent Technologies 8719D, User Manual

Page: 121 / 673

Cascading Multiple Example Sequences
By cascading test sequences, you can create subprograms for a larger test sequence. You can
also cascade sequences to extend the length of test sequences to greater than 200 lines.
In this example, you are shown two sequences that have been cascaded. You can do this by
having the last command in sequence 1 call sequence position 2, regardless of the sequence
title. Because sequences are identified by position, not title, the call operation will always go to
the sequence loaded into the given position.
1. To create the example multiple sequences, press:
The following sequences will be created:
Start of Sequence
134
SPAN
50
DO SEQUENCE
SEQUENCE 2
Start of Sequence
Tram:
LOG
SCALE/DIV
AUTO SCALE
You can extend this process of calling the next sequence from the last line of the present
sequence to 6 internal sequences, or an unlimited number of externally stored sequences.
2. To run both sequences, press:
M a k i n g M e a s u r e m e n t s