Agilent Technologies 8719D User Manual Download

Page: 364 / 673

Verify performance

Once a measurement calibration has been generated with a

calibration kit, its

performance should be checked before making device measurements. check the accuracy

that can be obtained using the new calibration kit, a device with a well-defined frequency

response (preferably

any of the standards used) should be measured. The verification

device must not be one of the calibration standards: measurement of one of these standards is

merely a measure of repeatability.
To achieve more complete verification of a particular measurement calibration, accurately

known

standards with a diverse magnitude and phase response should be

used. National standard traceable or HP standards are recommended to achieve verifiable

measurement accuracy.

Note

The published specifications for the HP

network analyzer

system include accuracy enhancement with compatible calibration kits

Measurement calibrations made with user-defined or

calibration kits

are not subject to the HP

specifications, although a procedure

similar to the system verification procedure may be used.

Summary of Contents for 8719D


































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 8719D

Reviews:

Related manuals for 8719D

Brands by name

Popular brands

Agilent Technologies 8719D, User Manual

Search results

Summary of Contents for 8719D

Reviews:

Related manuals for 8719D

Brands by name

Popular brands