AGFA DRYSTAR AXYS Service Manual Download Page 71

Page: 71 / 461

EALTH

ARE

Imaging Services

Chapter 2

Functional Description

Document No: DD+DIS033.07E

DOCUMENT CONTROL NOTE:

The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.

Edition 1, Revision 1

06-2009 printed in Germany

Agfa Company Confidential

Document Node ID: 14350804

eq_02_functional_e_template_v07

DRYSTAR

AXYS

Type 5367/100

►

Purpose of this document

This document explains the functional principle including the functions of the individual
assemblies.

►

Document History

Edition.

Revision

Release

Date

Changes
compared to previous Version 1.0

1.1 06-2009

•

Updated technical data in table, where different Drystar

printers are compared. See section 2.1.

•

Updated table with detailed comparison of Drystar 5302

with Drystar Axys: Added new functions of software
2.0.0_C2. See section 2.2.

•

Updated table with overview of calibrations.

See section 4.

►

Referenced Documents

Document

Title

DD+DIS142.09E

Service Bulletin 05: Software 2.0.0_C2 available

Summary of Contents for DRYSTAR AXYS














































































































































































































































































































































































































































































Search results

Summary of Contents for DRYSTAR AXYS

Reviews:

Brands by name

Popular brands

AGFA DRYSTAR AXYS, Service Manual

Search results

Summary of Contents for DRYSTAR AXYS

Reviews:

Brands by name

Popular brands