AGFA DRYSTAR AXYS Service Manual Download Page 116

Page: 116 / 461

DD+DIS033.07E

Repair and Service

Tools and Auxiliary Means

DOCUMENT CONTROL NOTE:

The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.

3.1

Key-Operator Menu on the local Keypad

Purpose

The key-operator menu allows most of the actions that are required for installation,
repair and maintenance of the printer.

Use

(1) Press the Key-operator menu key

to select the Key-operator

menu.

(2) With

the and

keys select

the desired menu, (or the desired
character when entering text).

(3) Use

the and

keys to select

the desired digit.

(4) Press

to confirm a selection or

to cancel.

536601ga.cdr

Figure 3

Notes

(1) The Key-operator menu is also available via the Printer Browser Pages

(username: drystar, password: axys).

(2) For a complete description of the Key-operator functions, please refer to the

DRYSTAR AXYS Reference manual.
An overview of all key-operator menus is available in section 3.7, ‘Software
menus, Settings’.

3.2

Infocounter

Purpose

The infocounter is used for troubleshooting purposes and for investigation of the

printer history before maintenance.

It contains following information:

•

General information about the printer

•

Information about the installation site of the printer

•

Information about the configuration and hardware components of the printer

•

Statistics about service interventions

•

Statistics about machine reliability

•

Error

history

This information about the printer is located in a persistent database.

Every 10 minutes there is an automatic update of the database on the hard disk.

Edition 1, Revision 0

DRYSTAR AXYS

Chapter 3.2 / 10

10-2007 Type

5367/100

Agfa Company Confidential

Summary of Contents for DRYSTAR AXYS














































































































































































































































































































































































































































































Search results

Summary of Contents for DRYSTAR AXYS

Reviews:

Brands by name

Popular brands

AGFA DRYSTAR AXYS, Service Manual

Search results

Summary of Contents for DRYSTAR AXYS

Reviews:

Brands by name

Popular brands