AGFA DRYSTAR AXYS, Service Manual

Page: 111 / 461

DD+DIS033.07E
Repair and Service
Tools and Auxiliary Means
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 0 DRYSTAR AXYS Chapter 3.2 / 5
10-2007 Type 5367/100
Agfa Company Confidential
1 Machine specific Tools
In addition to the conventional service tools which every service engineer has in his
toolbox, the following tools are required for service on the printer:
1.1 Mandatory tools
The mandatory tools are required for repair, troubleshooting or maintenance of the
printer.
Tool Part Number Purpose
Anti-static wrist strap CM+9.9999.0830.0 To avoid static discharges on
electronic components
Cleaning tissue (box
of 50 pieces) CM+309931.0 For cleaning of the printer
Densitometer* To be bought locally To perform CDM calibration
Ink Eraser 'Pelikan' 10+999991176.0 For the 'dry TH cleaning'
procedure
Isopropyl Alcohol and
lint free cloth Commercially available To clean the TH
Magnifying glass 8x CM+9.9579.9904.0 To check image quality of films at
the lightbox
Service key CM+9.0426.6309.0 To override the safety switch
Standard ruler (1mm) Commercially available For horizontal image adjustment
Density Reproduction
Check files Density reproduction
check files
are available
via MEDNET, GSO Library
To check calibration of CDM
(internal printer densitometer)
Waterproof pen commercially available To write on printed testfilms
EB+72010600 (USB) To read/write CF-cards on a
Service PC via USB interface CF card reader/writer
EB+72010160 (PCMCIA) To read/write CF-cards on a
Service PC via PCMCIA interface
External CF-card
128 MB CM+343356.0 To install and save software &
data.
Service PC Commercially available.
See also 1.2.1 and 1.2.2
on page 5.
To perform different service
actions (access to the printer
homepage; evaluate infocounter
etc.).