AGFA DRYSTAR AXYS, Service Manual

Page: 65 / 461

DD+DIS033.07E
Controls, Connections, and Setup Procedures
DOCUMENT CONTROL NOTE:
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 1 DRYSTAR AXYS Chapter 1 / 29
06-2008 Type 5367/100 Agfa Company Confidential
Accessible via … Local keypad and browser
Accessible via menu:
Key-operator menu - 2 Change settings - 4 Image Quality -
<Modality XYZ>
Purpose:
Adjust Image Quality in case it cannot be adapted at the
modality.
Default value:
•
Look-up table: Kanamori. Refer to
X
Figure 18.
•
Interpolation: Cubic HiRes -0.7. Refer to Figure 19.
•
Dmax 3.20.
Example browser
screen:
Daily used name
Modality AE-title
Look Up Table:
Interpolation:
Maximum density:
Key-Operator - Change Image quality settings
Kanamori
Kanamorilike
Linear
CubicHi-res
CubicBell
280
285
290
295
Linear
Replication
CT2
CT2_ARC
Accept changes Discard changes Reset Values
Welcome to this
DryStar Axys printer
Select abosulte smoothing factor: (advised = -0.7)
Select kanamori like value:
-0.7
100
Key-Operator - Change Image quality settings
Accept changes Discard changes Reset Values
Welcome to this
DryStar Axys printer
536701fs.cdr
Figure 19
NOTE:
Interpolation setting "Linear" usually gives too smooth image impression.
Interpolation settings "Replication" usually gives too "pixely" image impression.
Both settings are used in exceptional cases only.