AGFA DRYSTAR AXYS Service Manual Download Page 318

Page: 318 / 461

DD+DIS033.07E

Repair and Service

Software Releases and Patches

DOCUMENT CONTROL NOTE:

The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.

Software Release 1.6.0_C1

Type of new Software

1st customer release

Release Date

10/2007

Printer Serial Numbers



SN1024

Availability

MedNet, GSO Library*

Prerequisites

None

NOTE:

On MedNet, GSO Library always the latest available software release can be
downloaded.

1.1

Supported Features

All features as specified:



Printing diagnostic data according to the DICOM standard with a
resolution of 508dpi



Printing on Drystar DT2B, DT2C and DT2 Mammo blue base films



Supported film sizes:

DT2B / DT2C: 14x17", 14x14", 14x11", 10x12", 8x10"

DT2 Mammo: 14x11", 10x12", 8x10"

1.2

Limitations

Software 1.6.0_C1 has following limitations:



Only one module/spare part replacement per start-up allowed



Only Microsoft Internet Explorer 5.5 or higher can be used to access the printer
browser pages

Edition 1, Revision 3

DRYSTAR AXYS

Chapter 3.8 / 4

03-2011 Type

5367/100

Agfa Company Confidential

Summary of Contents for DRYSTAR AXYS














































































































































































































































































































































































































































































Search results

Summary of Contents for DRYSTAR AXYS

Reviews:

Brands by name

Popular brands

AGFA DRYSTAR AXYS, Service Manual

Search results

Summary of Contents for DRYSTAR AXYS

Reviews:

Brands by name

Popular brands