AGFA CR 10-X Service Manual Download Page 56

Page: 56 / 288

DD+DIS155.11E

Controls, Connections, and Setup Procedures

DOCUMENT CONTROL NOTE:

The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.

4.8.2

Training for Usage of Plates and Cassettes

Following items have to be part of the training for usage of plates and cassettes:



Labels and functional elements of the cassettes



First use and normal operation



Storage and transport



Operating

conditions



Cleaning

NOTE:

For more information refer to the CR Plates and Cassettes (CR MD 1.0 General)
User Manual.

Edition 1, Revision 4 CR 10-X / CR Reader / CR 12-X / CR Advanced Reader

Chapter 1 / Page 20 of 47

03-2013

Type 5151 / 100 / 110 / 200 / 210

Agfa Company Confidential

Summary of Contents for CR 10-X

































































































































































































































































































Search results

Summary of Contents for CR 10-X

Reviews:

AGFA CR 10-X, Service Manual, Page: 56 / 288

Search results

Summary of Contents for CR 10-X

Reviews: