AGFA CR 10-X Service Manual Download Page 195

Page: 195 / 288

EALTH

ARE

Imaging Services

Chapter 3.4

Repair and Service

Electrical and mechanical Codes, Fuses, LEDs

Document No: DD+DIS155.11E

DOCUMENT CONTROL NOTE:

The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.

Edition 1, Revision 2
03-2013 Printed in Germany

Agfa Company Confidential

Document Node ID: 33998033

eq_03-4_codings_e_template_v08

CR 10-X

Type 5151 / 100

CR Reader

Type 5151 / 110

CR 12-X

Type 5151 / 200

CR Advanced Reader

Type 5151 / 210

►

Purpose of this Document

This document describes the location and meaning of the LEDs and switches on the
printed circuit boards for repair activities.

►

Document History

Edition.

Revision

Release

Date

Changes
compared to Version 1.1:

1.2 03-2013



Added Power II Board



Added subtypes 110, 200 and 210.

►

Referenced Documents

Document

Title

Not applicable

Summary of Contents for CR 10-X

































































































































































































































































































Search results

Summary of Contents for CR 10-X

Reviews:

AGFA CR 10-X, Service Manual, Page: 195 / 288

Search results

Summary of Contents for CR 10-X

Reviews: