manualshive.com logo in svg

AGFA CR 10-X, Service Manual, Page: 47 / 288

Share
Download
AGFA CR 10-X Service Manual Download Page 47

 
 
DD+DIS155.11E 

Controls, Connections, and Setup Procedures

 
 
 

 

DOCUMENT CONTROL NOTE: 

The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled. 

 

4.1 

Adding Windows and NX Users 

 

 

NOTE: 

After NX activation the NX workstation has one service user “crservice” configured. The 
CR 10-X / CR 12-X configuration wizard additionally installs a standard user “Agfa”. 

The service user has Windows administrator rights as well as Service Engineer Rights 
on NX.  

If required, create additional users with NX operator rights. 

 

Figure 6

 

 

Edition 1, Revision 4  CR 10-X / CR Reader / CR 12-X / CR Advanced Reader 

Chapter 1 / Page 11 of 47 

03-2013 

Type 5151 / 100 / 110 / 200 / 210 

Agfa Company Confidential

 

Summary of Contents for CR 10-X

































































































































































































































































































Reviews:

No comments