AGFA CR 10-X Service Manual Download Page 279

Page: 279 / 288

EALTH

ARE

Imaging Services

Chapter 12

Glossary

Document No: DD+DIS155.11E

DOCUMENT CONTROL NOTE:

The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.

Edition 1, Revision 1
03-2013 Printed in Germany

Agfa Company Confidential

Document Node ID: 34000615

eq_12_glossary_e_template_v08

CR 10-X

Type 5151 / 100

CR Reader

Type 5151 / 110

CR 12-X

Type 5151 / 200

CR Advanced Reader

Type 5151 / 210

►

Purpose of this Document

This document contains explanations of product specific terms and abbreviations used
in the service manual.

►

Document History

Edition.

Revision

Release

Date

Changes
compared to version 1.0:

1.1

03-2013 Added subtypes 110, 200 and 210.

►

Referenced Documents

Document

Title

Not applicable

Summary of Contents for CR 10-X

































































































































































































































































































Search results

Summary of Contents for CR 10-X

Reviews:

AGFA CR 10-X, Service Manual, Page: 279 / 288

Search results

Summary of Contents for CR 10-X

Reviews: