Abicor Binzel iROB 501 PRO, Original Operating Instructions

Page: 77 / 128

iROB
®
501 PRO 7 Operation
EN - 77
7.12.1 Welding parameter/internal function settings
The following content can be stored in the file "BINZEL_iROB_WELDING_PARAMETER.CSV":
— All welding parameters stored in the memory
— The values of the internal functions at the time of the data backup
The parameter set currently displayed on the control panel is not stored. (If necessary, store this to the
welding power source’s memory in advance.)
The welding parameters stored in the welding power source’s memory are arranged so as to list the job
numbers vertically and the relevant parameters horizontally.
Fig. 39
Parameter value
Parameters in job no. 1
Unused job numbers are indicated by a "-".
Jo
b n
o.
Tab. 40
Gap Position Description Unit Gap Position Description Unit
A job_num Job no. −255 to
−155,
1 to 100
AA wmode_H Process information
1
1
B spot_time Arc spot time 0.1 s AB wmode_L Process information
2
1
C prf_tim Shielding gas
pre-flow time
0.1 s AC pre_feed Starting wire feed
speed
0.1 m/min
D pre_iset Starting current 1 A AD wld_feed Wire feed speed 0.1 m/min
E pre_vset Starting voltage 0.1 V AE cre_feed End crater wire
feed speed
0.1 m/min
F pre_uni_vset Starting voltage
(synergetic)
1 ± AF ant_tim_adj Backburn time
Adjustment
0.01 s
G wld_iset Welding current 1 V AG ant_vset_adj Burnback voltage
adjustment
0.1 V
H weld_vset Welding voltage 0.1 V AH sldwn_adj Creep time
adjustment
0.1 m/min
I wld_uni_vset Welding voltage
(synergetic)
1 ± AI up_slp_tim Ramp-up time 0.1 s
J cre_iset End crater filling
flow
1 A AJ dwn_slp_tim Ramp-down time 0.1 s
K cre_vset End crater filling
voltage
0.1 V AK pre_tim Start time 0.1 s
L cre_uni_vset End crater filling
voltage (synergetic)
1 ± AL cre_tim Crater time 0.1 s
M aff_tim Shielding gas post-
flow time
0.1 s AM prelset (Reserved) –
N acr_char Arc characteristic 1 ± AN prelsetPer (Reserved) –
O wave_frq Wave frequency 0.1 Hz AO CrelsetPer (Reserved) –
P arc_char2 Arc characteristics
(reserved)
– AP TSCricklset Torch trigger
Current adjustment
0
(OFF)
Q en_ratio EN ratio 1% AQ CrilsetStep1 One-click
adjustment value
1 A