EN
-
36
7 Operation
iROB
®
501 PRO
Wire Buffer KINETIC
1
Ensure that the cover is closed.
2
To make it easier to insert the welding wire, insert a blunt tool into the openings and press the wire
guide up.
3
Press the wire feed button until the welding wire is fed through the coaxial cable.
4
If the welding wire tip gets caught, pull out the welding wire again and check the condition of the wire tip.
Pull Feeder KINETIC
1
Open the front cover.
2
thereby lifting the pressure roll
3
Insert the welding wire through the through-feed guide
into the welding torch.
WARNING
Electric shock due to contact with live components
Parts inside the device could be live during operation. Touching live components can lead to fatal electric
shocks or burns.
► Always keep the cover closed and open it only when the power supply is interrupted.
Fig. 34
Inserting the welding wire into the Wire Buffer KINETIC
Fig. 35
Insert welding wire
A
Conveyor roller
B
Inlet guide
C
Pressure roll
D
Pressure lever
E
Through-feed guide
A
D
E
C
B
