Abicor Binzel iROB 501 PRO, Original Operating Instructions

Page: 58 / 128

EN - 58
7 Operation iROB
®
501 PRO
7.8.2 Description of the internal functions
Some internal functions can be saved with the welding parameters. These are marked with "Yes" in the
Storage option row of the tables in the descriptions.
Tab. 35 Overview of internal functions
No./function name Adjustable range Starting value
F1: no function – –
F2: setting pulse details ON/OFF OFF
F3: switching the heat input display ON/OFF OFF
F6: setting the rise time
0 to 10 s 0 s
F7: setting the decay time 0 to 10 s 0 s
F8: setting the display hold time 0 to 60 s 20 s
F12: setting the run-on time for the cooling water
pump (option) 20 to 60 min 20 min
F14/F15: adjusting the start control (time and
current)
−100 to +100% 0%
F16: setting the wire creep −1 to 1 m/min 0 m/min
F17/F18: setting the backburn time/backburn
voltage −50 to 50 ms
−9.9 to +9.9 V
0 ms
0 V
F19: setting the switching off of the alarm ON/OFF OFF
F20: setting the lower threshold value of the mains
voltage monitoring
260 to 400 V 320 V
F21: activating the maximum capacity of the
cooling fan ON/OFF OFF
F22: deactivating the button tones ON/OFF ON
F23: setting the time period until stand-by mode 0 to 10 min 0 min
F24: setting the wire feed speed
ON/OFF OFF
F25–F28: setting external outputs 0/4 0
F29–F32: setting external inputs 0 to 12 0
F33: displaying the necking detection blocking
ratio – –
F34: automatically correcting the necking
detection sensitivity
ON/OFF ON
F35: saving necking detection sensitivity ON/OFF OFF
F36/F37: adjusting spatter control (P1P/P2P) −100 to +100 0
F38: switching on advanced welding circuit
resistance measurement ON/OFF OFF
F43: CAN ID
1 to 16 1
F45/F46/F47: special end crater filling sequence ON/OFF
0 to 10 s
0 to 10 s
OFF
0 s
0 s
F52: DataLOG function data types 0 to 8 0
F53: setting the scanning frequency for the
DataLOG function 1 to 3 1
F60: fine adjustment of the pulse peak current
−150 to +150 A 0 A
F61: fine adjustment of the pulse peak time −15 to +15 ms 0 ms
F62: fine adjustment of the base current −60 to +60 A 0 A
F63: fine adjustment of the pulse peak current in
the low pulse phase −150 to +150 A 0 A
F64: fine adjustment of the pulse peak time in the
low pulse phase
−1.5 to +1.5 ms 0 ms
F65: fine adjustment of the base current in the low
pulse phase −60 to +60 A 0 A
F66: adjusting the feed amplitude ratio 0 to 100% 50%