ABB IRB 5720, Product Manual

Page: 64 / 610

3.3.3 Lifting the robot
3.3.3.1 Lifting the robot with fork lift
Lifting methods
The robot may be lifted and transported using a fork lift, provided that available
special aids are used.
For rotation of the robot to an inverted position, the fork lift accessory must be
used together with a special turning tool or a fork lift truck with a rotator attachment.
This section specifies available special aids and references to valid user
documentation for the lifting accessories.
Required tools and equipment
Note Article number Equipment
Contains fork lift pockets and all
required hardware for installation
on frame.
User instructions are enclosed
with the tool. 3HAC058825-001 Fork lift accessory set
Contains fork lift pockets and all
required hardware for installation
on robot base.
User instructions are enclosed
with the tool. 3HAC047054-003 Fork lift accessory set
Required for rotating the robot to
an inverted position. - Fork lift truck with rotator attach-
ment
Required documents
Document number Document
3HAC061161-001 Directions for use - Fork lift accessory for IRB
5710/IRB5720
TBD
xxx new document required -
written by UserDoc xxx Directions for use - Fork lift accessory for IRB
5710/IRB5720
Lifting the robot
Note Action
Lift the robot according to the user instructions
enclosed with the fork lift accessory. 1
64 Product manual - IRB 5720
3HAC079195-001 Revision: A
© Copyright 2022 ABB. All rights reserved.
3 Installation and commissioning
3.3.3.1 Lifting the robot with fork lift