ABB ACS880+N5350, User Manual

Page: 81 / 247

12-2 Startup Assistant & Parameters 3AXD50000011888
Table 12-1 Initial Start-up / Motor Data and ID Run
On initial startup, the drive goes into the Motor data setup.
and this screen will not be shown.
Note: This screen will not show on first startup.
On subsequent startups, select “Motor Data and ID Run”
from the Assistants menu, which is located off of the main
menu.
00:00 Select Back
CTDD 0.0 rpm Remote
Assistants
Motor Data & ID Run
CTDD Setup

Motor Data and ID Run Assistant will load. Press
(continue) to begin the cooling tower startup
assistant.
00:00 Continue Exit
CTDD 0.0 rpm Remote
Motor Set-up
Use arrow keys and soft keys to
Navigate the assistant

Press (next) to start the set-up assistant.
00:00 Next Exit
CTDD 0.0 rpm Remote
Set-up Assistant
Start set-up
Exit and don’t show at power-up