ABB ACS6080, User Manual

Page: 17 / 238

Figure 5-8 AC busbar joints between the COU/TEU and LSU
(14 MVA).
102
Figure 5-9 Air-to-air heat exchanger (type LT-5-5165-UL) 106
Figure 5-10 Tools for installing an air-to-air heat exchanger 106
Figure 5-11 Correct and incorrect cable installation 108
Figure 5-12 ARU/INU/IFU cable routing 110
Figure 5-13 LSU cable routing 110
Figure 5-14 Air-to-air heat exchangers (type LT-5-5165-UL) 111
Figure 5-15 Tools for removing an air-to-air heat exchanger 112
Figure 5-16 Installation example of transformers in an air-to-air
heat exchanger
114
Figure 5-17 Connect wires to terminal block 115
Figure 5-18 Pressure relief vents 115
Figure 5-19 Tools required to fasten the pressure relief vent
to the roof
116
Figure 5-20 Installation example of pressure relief vents 116
Figure 5-21 Attach sealing tape to the joining crossbar (1) 117
Figure 5-22 Roof joints (1) 118
Figure 5-23 Roof attachment parts 119
Figure 5-24 Recommended ceiling and wall fixings 120
Figure 6-1 Phase module on lift table 121
Figure 6-2 Grounding the input side (A) and output side (B)
of the drive system
123
Figure 6-3 System ground connection (1) in a 600 mm TEU 124
Figure 6-4 Grounding the EXU 125
Figure 6-5 Cable tray and cable ducts in an LSU (A =
front)
126
Figure 6-6 Arc Guard System™ in an optional roof extension
box (REB)
127
Figure 6-7 Location of Arc Guard sensors in a TEU 128