3BHS842007 E01 REV C
ACS6080
USER MANUAL
05 MECHANICAL INSTALLATION
5.3.5
Cable duct material
5.3.6
Installation material
Installation material is supplied with the drive in a separate box.
5.3.7
Tools
5.3.8
Floor preparation
See “Appendix C – Mechanical drawings”.
5.3.9
Floor fixation
The cabinet can be bolted or welded to the floor. For more information,
see “Appendix C – Mechanical drawings”.
5.3.10
Raw water circuit
The incoming and outgoing raw water pipes are connected to the flanges
of the WCU. Installation material such as counter-flanges, bolts, nuts and
seals are supplied. For information on dimensions of the raw water entry
and the flanges, see “Appendix C – Mechanical drawings”.
▲
NOTICE
Risk of component damage!
• Use cable ducts of non-flammable material with non-
abrasive surface.
• To prevent dust, humidity and animals from entering the drive,
protect all cable entries and exits of cable ducts.
⚠
CAUTION
Hazardous voltage!
• If you want to weld a cabinet to the floor, connect the earth clamp
of the welder to the PE ground busbar of the drive.
