09 PREVENTIVE AND CORRECTIVE MAINTENANCE
3BHS842007 E01 REV C
ACS6080
USER MANUAL
212/238
10.
Start the drive according to the established procedures.
9.4.9.2
Fitting the busbar connectors
1.
Shut down the drive according to the established procedures.
2.
Fit the busbar connectors in the sequence shown in Fig. 9-21.
Figure 9-21 Fitting sequence for busbar connectors
3.
Remove the grounding sets.
4.
Check that the LEDs are lit.
5.
Check that tools and foreign objects are not left inside the cabinets.
6.
Close and lock the doors.
7.
Check that the power operating mode (POM) of the drive corresponds
to the busbar connectors fitted.
8.
Start the drive according to the established procedures.
1
2
3
4
