ABB ACS6080, User Manual

Page: 18 / 238

Figure 6-8 Cable tray and cable ducts in an LSU (A =
front)
128
Figure 6-9 Cable entry with type 1 sealing modules 129
Figure 6-10 Cable entry frame with type 1 sealing modules 130
Figure 6-11 Cable entry with type 2 sealing modules 131
Figure 6-12 Cable gland 131
Figure 6-13 Cable entry with EMC plates 132
Figure 6-14 TEU 1000 mm cabinet (A = back) with top (1)
and bottom (2) cable entries
133
Figure 6-15 Short busbar removal in ARU 134
Figure 6-16 EXU with top cable entry (A) and EXU with
bottom cable entry (B)
135
Figure 6-17 EXU cabinet 135
Figure 6-18 Preparing power cables for sealing modules 137
Figure 6-19 Prepare power cables for cable glands 138
Figure 6-20 Preparing cables for EMC plates: (A) cables with
an outer screen or shield, (B) cables without an
outer screen or shield or (C) cables in an
EXU cabinet
139
Figure 6-21 Cable connections in an EXU cabinet 140
Figure 6-22 Minimum distance between bolted joints of different
phases in an EXU
141
Figure 6-23 Bolted busbar connection - marine drives 141
Figure 6-24 Bolted busbar connection - non-marine drive 142
Figure 6-25 Cable entry with sealing modules 144
Figure 6-26 Preparing control cables for sealing modules 144
Figure 6-27 Preparing auxiliary control cables for cable glands 145
Figure 6-28 Preparing the screens of control cables for EMC
plates
146
Figure 6-29 Preparing control cables for EMC plates 147