3BHS842007 E01 REV C
ACS6080
USER MANUAL
04 TRANSPORTATION, STORAGE AND DISPOSAL
4.7
Storing and handling of spare parts
4.7.1
Warranty information
IMPORTANT!
Check the spare parts immediately after receipt for damages
and report any damage to the shipping company and the ABB
service organization.
Observe the following to maintain spare parts in good condition and to
keep the warranty valid during the warranty period:
• Keep spare parts in their original packaging.
• Store printed circuit boards in antistatic bags or boxes.
• Storage temperature range: -5 °C to + 55 °C
• Storage place requirements:
- Free of vibration and shock
- Protected against dust, sand, vermin and insects
- Free of corrosive gases, salt or other impurities that could
damage electronic equipment
- Dry, no condensation
- Relative humidity: 5 – 85%
• DO NOT touch a circuit board without wearing a wrist
grounding strap.
• Put the component on a grounded working surface protected
against electrostatic discharges.
• Hold the component only by the edge.
▲
NOTICE
Risk of component damage!
Electronic devices (eg, circuit boards, semiconductors) are sensitive to
electrostatic discharge (ESD).
• Apply ESD handling precautions before handling these devices.
