ABB ACS310, User Manual

Page: 117 / 376

Program features 117

List of the tasks and the relevant drive parameters
Depending on the selection made in the Application task (parameter 9902 APPLIC
MACRO ), the Start-up assistant decides which consequent tasks it suggests.
Name Description Set parameters
Language select Selecting the language 9901
Motor set-up Setting the motor data 9905 … 9909
Application Selecting the application macro 9902 , parameters
associated to the macro
Option modules Activating the option modules Group 35 MOTOR TEMP
MEAS , group 52 PANEL
COMM
9802
Speed control EXT1 Selecting the source for the speed (output
frequency) reference
1103
(If AI1 is used: Setting analog input AI1
limits, scale, inversion)
( 1301 … 1303 , 3001 )
Setting the reference limits 1104 , 1105
Setting the frequency limits 2007 , 2008
Setting the acceleration and deceleration
times
2202 , 2203
Speed control EXT2 Selecting the source for the speed (output
frequency) reference
1106
(If AI1 is used: Setting analog input AI1
limits, scale, inversion)
( 1301 … 1303 , 3001 )
Setting the reference limits 1107 , 1108
PID control Selecting the source for the process
reference
1106
(If AI1 is used: Setting analog input AI1
limits, scale, inversion)
( 1301 … 1303 , 3001 )
Setting the reference limits 1107 , 1108
Setting the speed (reference) limits 2007 , 2008
Setting the source and limits for the
process actual value
4016 , 4018 , 4019
Start/Stop control Selecting the source for start and stop
signals of the two external control
locations, EXT1 and EXT2
1001 , 1002
Selecting between EXT1 and EXT2 1102
Defining the direction control 1003
Defining the start and stop modes 2101 … 2103
Selecting the use of Run Enable signal 1601
Protections Setting the current limits 2003
Aotewell Ltd www.aotewell.com Industry Automation
HongKong|UK|China sales@aotewell.com +86-755-8660-6182