ABB ACS310, User Manual

Page: 192 / 376

192 Actual signals and parameters
1502 AO1
CONTENT MIN
Defines the minimum value for the signal selected with
parameter 1501 AO1 CONTENT SEL .
AO minimum and maximum correspond to the 1504
MINIMUM AO1 and 1505 MAXIMUM AO1 settings as
follows:
-
x…x Setting range depends on the parameter 1501 AO1
CONTENT SEL setting.
-
1503 AO1
CONTENT
MAX
Defines the maximum value for the signal selected with
parameter 1501 AO1 CONTENT SEL . See the figure for
parameter 1502 AO1 CONTENT MIN .
-
x…x Setting range depends on the parameter 1501 AO1
CONTENT SEL setting.
-
1504 MINIMUM AO1 Defines the minimum value for the analog output signal AO.
See the figure for parameter 1502 AO1 CONTENT MIN .
0.0 mA
0.0…20.0 mA Minimum value 1 =
0.1 mA
1505 MAXIMUM
AO1
Defines the maximum value for the analog output signal AO.
See the figure for parameter 1502 AO1 CONTENT MIN .
20.0 mA
0.0…20.0 mA Maximum value 1 =
0.1 mA
1506 FILTER AO1 Defines the filter time constant for analog output AO, ie the
time within which 63% of a step change is reached. See the
figure for parameter 1303 FILTER AI1 .
0.1 s
0.0…10.0 s Filter time constant 1 = 0.1 s
16 SYSTEM
CONTROLS
Parameter view, Run enable, parameter lock etc.
1601 RUN ENABLE Selects a source for the external Run enable signal. NOT SEL
NOT SEL Allows the drive to start without an external Run enable
signal.
0
DI1 External signal required through digital input DI1. 1 = Run
enable. If Run enable signal is switched off, the drive does
not start or coasts to stop if it is running.
1
DI2 See selection DI1 . 2
DI3 See selection DI1 . 3
DI4 See selection DI1 . 4
DI5 See selection DI1 . 5
All parameters
No.
Name/Value Description Def/FbEq
1505
1504
1502 1503
1505
1504
1503 1502 AO
content
AO (mA)
AO (mA)
AO
content
Aotewell Ltd www.aotewell.com Industry Automation
HongKong|UK|China sales@aotewell.com +86-755-8660-6182