Abarth Punto Owner'S Handbook Manual Download Page 193

Page: 193 / 271

189

KNOWING

YOUR VEHICLE

SAFETY

STARTING

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

F0U172Ab

fig. 168

ENGINE COOLANT fig. 168

The coolant level must be checked when the engine is
cold and must range between the MIN. and MAX. marks
on the reservoir.

If the level is low, slowly pour a mixture of 50%
demineralised water and 50% PARAFLU

PETRONAS LUBRICANTS through the filler neck A
until the level reaches MAX.

The used engine oil and the replaced oil
filter contain substances that may be
dangerous for the environment. It is

advisable to have oil and filters changed by an
Abarth Dealership where they will be disposed in
accordance with nature and the law.

PARAFLU

anti-freeze is used in the

engine cooling system. Use the same fluid
as in the cooling system when topping up.

PARAFLU

may not be mixed with any other

types of fluids. If this accidentally occurs, do not
start the engine and contact an Abarth
Dealership.

A 50-50 mixture of PARAFLU

and demineralised

water gives freeze protection to -35°C.

When the vehicle is used under particularly harsh
weather conditions, we recommend using a 60-40
mixture of PARAFLU

and demineralised water.

The engine cooling system is pressurised.
If necessary, only replace the cap with

another genuine one or the operation of the
system may be adversely affected. Do not
remove the cap from the reservoir when the
engine is hot: danger of scalding.

WARNING

183-204 PUNTO Abarth GB 1ed 17-07-2012 15:17 Pagina 189

Summary of Contents for Punto
















































































































































































































































































Search results

Summary of Contents for Punto

Reviews:

Related manuals for Punto

Brands by name

Popular brands

Abarth Punto, Owner'S Handbook Manual

Search results

Summary of Contents for Punto

Reviews:

Related manuals for Punto

Brands by name

Popular brands