Abarth Punto Owner'S Handbook Manual Download Page 238

Page: 238 / 271

234

RADIO

TONE ADJUSTMENT (bass/treble)

Proceed as follows:

❒

Use the button

▲

▼

to set “Bass” or “Treble” in

the AUDIO menu;

❒

press the button

to increase/decrease the

bass or treble settings.

By pressing the buttons briefly, the levels will change
progressively. By pressing them down longer, the levels
will change quickly.

BALANCE ADJUSTMENT

Proceed as follows:

❒

Use the button

▲

▼

to set “Balance” in the

AUDIO menu;

❒

press the

button to increase the sound from the

right speakers or the

button to increase the sound

from the left speakers.

By pressing the buttons briefly, the levels will change
progressively. By pressing them down longer, the levels
will change quickly.

Select the “

” value to set the right and left audio

outputs to the same value.

FADER ADJUSTMENT

Proceed as follows:

❒

Use the button

▲

▼

to set “Fader” in the AUDIO

menu;

❒

press the

button to increase the sound from the

rear speakers or the

button to increase the sound

from the front speakers.

By pressing the buttons briefly, the levels will change
progressively. By pressing them down longer, the levels
will change quickly.

Select the value “

” to set the right and left audio

outputs to the same level.

LOUDNESS FUNCTION

The Loudness function improves the volume of the
sound whilst listening at low volumes, increasing the bass
and treble.

To activate/deactivate this function, use the button

to select the “Loudness” setting in the AUDIO menu.

The condition of the function (on or off) is shown on the
display for a few seconds by the text “Loudness On” or
“Loudness Off”.

221-258 PUNTO Abarth GB 1ed 17-07-2012 13:27 Pagina 234

Summary of Contents for Punto
















































































































































































































































































Search results

Summary of Contents for Punto

Reviews:

Related manuals for Punto

Brands by name

Popular brands

Abarth Punto, Owner'S Handbook Manual

Search results

Summary of Contents for Punto

Reviews:

Related manuals for Punto

Brands by name

Popular brands