Abarth Punto Owner'S Handbook Manual Download Page 5

Page: 5 / 271

Dear Customer

Thank you for selecting Abarth and congratulations on your choice of an Abarth Punto.

We have written this handbook to help you get to know all the features of your car and use it in the best possible
way.

You should read it right through before taking to the road for the first time.

It contains important information, advice and instructions for the use of the car which will help you get the very best
out of your Abarth.

Read the warnings and indications, marked with the following symbols:

personal safety;

car safety;

environmental protection.

The enclosed Warranty Booklet lists the services that Abarth offers to its customers:

❒

the Warranty Certificate with terms and conditions for maintaining its validity

❒

the range of additional services available to Abarth Customers.

Enjoy reading. Happy motoring!

❒

OWNER HANDBOOK

1-220

❒

RIGHT HAND DRIVE VERSION

257-258

❒

RADIO

221-254

001-028 PUNTO Abarth GB 1ed 17-07-2012 12:04 Pagina 1

Summary of Contents for Punto
















































































































































































































































































Search results

Summary of Contents for Punto

Reviews:

Related manuals for Punto

Brands by name

Popular brands

Abarth Punto, Owner'S Handbook Manual

Search results

Summary of Contents for Punto

Reviews:

Related manuals for Punto

Brands by name

Popular brands