240
RADIO
SPEED VOLUME function
(speed-dependent volume variation)
This function automatically adapts the volume level to
the speed of the car, increasing the volume when the
speed increases to maintain the relationship with the
noise level inside the passenger compartment.
To turn the function on/off, press the
¯
/
˙
buttons.
The text “Speed volume” appears on the display,
followed by the current status of the function:
❒
Off: function off.
❒
Low: unction activated (low sensitivity).
❒
High: function activated (high sensitivity).
RADIO ON VOLUME function (radio volume
limits activation/deactivation)
This function makes it possible to activate/deactivate the
volume limits when turning the radio on.
The display shows the function status:
❒
“Radio on vol – Limit on”: when the radio is switched
on the volume level will be:
– if the volume level is equal to or higher than the
maximum value, the radio will come on at the
maximum volume;
– if the volume level is between the minimum and
maximum values, the radio will come on at the same
volume as before it was switched off.
❒
“Radio on vol – Limit off”: the radio will come on at
the volume level it was at before switching off. The
volume level can be between 0 and 40
To change the setting of the selected function, use
the
¯
/
˙
buttons.
NOTES
❒
Using the Menu it is only possible to adjust the
activation/deactivation of the function and not the
minimum or maximum volume value.
❒
If turning on the radio the function “TA”, “TEL” or an
external audio source is activated, the radio will turn
on with the volume set for these sources. When the
outside audio source is deactivated, the volume can be
adjusted between the minimum and maximum levels.
❒
If the battery charge is low, it will not be possible to
adjust the volume between the minimum and maximum
levels.
221-258 PUNTO Abarth GB 1ed 17-07-2012 13:28 Pagina 240
