manualshive.com logo in svg

Abarth Punto, Owner'S Handbook Manual

The Abarth Punto Owner's Handbook Manual is the comprehensive guide you need to get the most out of your vehicle. This manual, available for free download at manualshive.com, provides detailed instructions, maintenance tips, and essential information to ensure optimal performance. Unlock the full potential of your Abarth Punto today!

Share
Download
background image

137

KNOWING

YOUR VEHICLE

SAFETY

STARTING 

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN 

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

Top speed

Fuel consumption considerably increases with speed.
Maintain a constant speed, avoiding unnecessary braking
and acceleration, which cost in terms of both fuel and
emissions.

Acceleration

Accelerating violently severely affects consumption and
emissions: acceleration should be gradual and should not
exceed the maximum torque.

CONDITIONS OF USE

Cold starting

Short journeys and frequent cold starts will prevent the
engine from reaching optimal running temperature.
Consequently, both consumption (from +15 to +30% on
urban cycle ) and emissions will increase.

Traffic and road conditions

Rather high consumption levels are linked to situations
with heavy traffic, for instance when travelling in queues
with frequent use of the lower gears or in cities with
many traffic lights. Winding mountain roads and rough
road surfaces also adversely affect consumption.

Stops in traffic

During prolonged stops (e.g. level crossings) the engine
should be switched off.

131-140 PUNTO Abarth GB 1ed  17-07-2012  13:20  Pagina 137

Summary of Contents for Punto
















































































































































































































































































Reviews:

No comments

Related manuals for Punto

AC Schnitzer F40 Fitting Instructions Manual preview
F40
Brand: AC Schnitzer Pages: 16
JETBAG 320 Fitting Instructions Manual preview
320
Brand: JETBAG Pages: 44
RAM 2015 1500 User Manual preview
2015 1500
Brand: RAM Pages: 292
RAM Trucks 1500 User Manual preview
Trucks 1500
Brand: RAM Pages: 116
Meta System FrontPlate4 Manual preview
FrontPlate4
Brand: Meta System Pages: 16
FALCON RIDGE Bobcat 3400 Instructions For Installation And Care preview
Bobcat 3400
Brand: FALCON RIDGE Pages: 4
Cadillac XLR-V Specifications preview
XLR-V
Brand: Cadillac Pages: 2
Buick Cascada 2016 Getting To Know Manual preview
Cascada 2016
Brand: Buick Pages: 20
Fabbri BICI OK 2 Manual preview
BICI OK 2
Brand: Fabbri Pages: 32
Whelen Engineering Company SAK34 Installation Manual preview
SAK34
Brand: Whelen Engineering Company Pages: 2
Ecco Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600 Manual preview
Nova Electronics Hide-a-Led DEUCE DUAL HEAD W600
Brand: Ecco Pages: 2
Quadratec 506-Rock Quick Start Quide preview
506-Rock
Brand: Quadratec Pages: 2
Genesis GV60 2023 Owner'S Manual preview
GV60 2023
Brand: Genesis Pages: 690
Technaxx FMT1200BT User Manual preview
FMT1200BT
Brand: Technaxx Pages: 59
Blue Bird TC/2000 Owner'S Manual preview
TC/2000
Brand: Blue Bird Pages: 111
TrailPRO TPRGBW4 Quick Start Manual preview
TPRGBW4
Brand: TrailPRO Pages: 3
CDI 123-9800 Installation And Troubleshooting Manual preview
123-9800
Brand: CDI Pages: 2
Honda 2013 Accord Coupe EX Technology Reference Manual preview
2013 Accord Coupe EX
Brand: Honda Pages: 20

Brands by name

Popular brands

Load more brands