manualshive.com logo in svg

Abarth Punto, Owner'S Handbook Manual

The Abarth Punto Owner's Handbook Manual is the comprehensive guide you need to get the most out of your vehicle. This manual, available for free download at manualshive.com, provides detailed instructions, maintenance tips, and essential information to ensure optimal performance. Unlock the full potential of your Abarth Punto today!

Share
Download
background image

F0U113Ab

fig. 113

GROUP 1

From 9 kg to 18 kg, children may be carried facing
forwards fig. 113.

116

KNOWING

YOUR VEHICLE

SAFETY

STARTING 

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN 

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

Do not place a cradle seat facing
backwards on the front seat if the

passenger side airbag is on. Deployment of the
airbag in an accident could cause fatal injuries
to the baby regardless of the severity of the
collision. It is advisable to always carry children
in dedicated child seats on the rear seat, which
is the most protected position in the event of an
accident.

WARNING

WARNING Should it be absolutely

necessary to carry a child on the front
seat in a backwards-facing child seat, the
passenger’s front and side airbags should
be deactivated through the setup menu.

Deactivation can be verified by checking the 

“

warning light on the instrument panel. Move the
passenger’s seat as far back as possible to avoid
contact between the child seat and the dashboard.

WARNING

The figures are only examples for fitting
purposes. Fit the child seat according to

the instructions mandatorily supplied with the
seat.

WARNING

There are seats with Isofix attachments
which enable secure fastening to the

seat without using the vehicle’s seat belts.

WARNING

109-130 PUNTO Abarth GB 1ed  17-07-2012  12:10  Pagina 116

Summary of Contents for Punto
















































































































































































































































































Reviews:

No comments

Related manuals for Punto

Yakima K343 Manual preview
K343
Brand: Yakima Pages: 11
Oldsmobile 2004 Alero Owner'S Manual preview
2004 Alero
Brand: Oldsmobile Pages: 360
Carax HUD CRX-3001 Quick Start Manual preview
HUD CRX-3001
Brand: Carax Pages: 2
Vauxhall INSIGNIA 2017 Owner'S Manual preview
INSIGNIA 2017
Brand: Vauxhall Pages: 323
Bestop WrapAround Windjammer Installation Instructions Manual preview
WrapAround Windjammer
Brand: Bestop Pages: 7
Whispbar K561W Fitting Instructions Manual preview
K561W
Brand: Whispbar Pages: 15
Dodge 8W-30 Wiring Diagram preview
8W-30
Brand: Dodge Pages: 24
Jeep 2014 Grand Cherokee SRT8 Owner'S Manual preview
2014 Grand Cherokee SRT8
Brand: Jeep Pages: 596
Skoda 1K0 051 437 Assembly Instructions preview
1K0 051 437
Brand: Skoda Pages: 4
Baja Designs 447575 Instructions preview
447575
Brand: Baja Designs Pages: 5
NavLinkz RL4-ELINK Manual preview
RL4-ELINK
Brand: NavLinkz Pages: 23
KlipXtreme Ridesmart KMA-610 Manual preview
Ridesmart KMA-610
Brand: KlipXtreme Pages: 12
Summit Racing SUM-G1083 Assembly & Use Instructions preview
SUM-G1083
Brand: Summit Racing Pages: 11
Westin 28-0160 Instructions preview
28-0160
Brand: Westin Pages: 3
Whelen Engineering Company 12H4S140 Installation Manual preview
12H4S140
Brand: Whelen Engineering Company Pages: 4
Black Horse Off Road TR-JECOOE Installation Instructions preview
TR-JECOOE
Brand: Black Horse Off Road Pages: 3
Chevrolet CORVETTE 2020 Owner'S Manual preview
CORVETTE 2020
Brand: Chevrolet Pages: 324
FACTORY UTV Dual Clamp Spare Tire Mount Installation Manual preview
Dual Clamp Spare Tire Mount
Brand: FACTORY UTV Pages: 2

Brands by name

Popular brands

Load more brands