manualshive.com logo in svg

Abarth Punto, Owner'S Handbook Manual

The Abarth Punto Owner's Handbook Manual is the comprehensive guide you need to get the most out of your vehicle. This manual, available for free download at manualshive.com, provides detailed instructions, maintenance tips, and essential information to ensure optimal performance. Unlock the full potential of your Abarth Punto today!

Share
Download
background image

135

KNOWING

YOUR VEHICLE

SAFETY

STARTING 

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN 

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

Press the clutch pedal fully to change
gears correctly. For this reason, there

must be no obstacles on the floor under the
pedals: ensure that rubber mats (if any) are
lying flat and do not interfere with the pedals. 

WARNING

Do not drive with your hand resting on
the shifting lever, because this pressure,
even if light, over time can wear out the

gearbox internal components.

MPORTANT Use of the clutch pedal must be limited
solely to gear changes. Do not drive with your foot
resting on the clutch pedal, however slightly. For
versions/markets where provided, the electronic clutch
control can intervene if it interprets incorrect driving
style as a fault.

CONTAINING RUNNING COSTS

Here are some suggestions which may help you to keep
the running costs of your vehicle down and lower the
amount of toxic emissions released into the
atmosphere.

GENERAL CONSIDERATIONS

Car maintenance

Have checks and adjustments carried out in accordance
with the “Scheduled Servicing Plan”.

Tyres

Check the pressure of the tyres routinely at an interval
of no more than 4 weeks: if the pressure is too low,
consumption levels increase as resistance to rolling is
higher.

Unnecessary loads

Do not travel with an overloaded boot. The weight of
the car (especially when driving in town) and the way in
which it is laden greatly affect fuel consumption and
stability.

131-140 PUNTO Abarth GB 1ed  17-07-2012  13:20  Pagina 135

Summary of Contents for Punto
















































































































































































































































































Reviews:

No comments

Related manuals for Punto

LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
EZTRUNK PHANTOM JK Assembly Manual preview
PHANTOM JK
Brand: EZTRUNK Pages: 3
Fab Fours F2950 Installation Instructions Manual preview
F2950
Brand: Fab Fours Pages: 21
Sumitomo Dunlop L.D02.C.M Installation Manual preview
Dunlop L.D02.C.M
Brand: Sumitomo Pages: 22
Buick 2015 LaCrosse Getting To Know Manual preview
2015 LaCrosse
Brand: Buick Pages: 20
Quadratec 11113.1435 Quick Start Manual preview
11113.1435
Brand: Quadratec Pages: 14
Acura RLX 2016 Service Bulletin preview
RLX 2016
Brand: Acura Pages: 7
Master Tailgaters MR-43E2DVR1 User Manual preview
MR-43E2DVR1
Brand: Master Tailgaters Pages: 10
iDataLink BLADE-AL-HK4-EN Install Manual preview
BLADE-AL-HK4-EN
Brand: iDataLink Pages: 35
Over Armour Offroad TX-STAMP-4-TC01 Instructions For Installation And Care preview
TX-STAMP-4-TC01
Brand: Over Armour Offroad Pages: 4
PAC RadioPRO4 Manual preview
RadioPRO4
Brand: PAC Pages: 5
Toyota 2012 CAMRY LE Emergency Response Manual preview
2012 CAMRY LE
Brand: Toyota Pages: 31
SSANGYONG ACTYON SPORTS Instruction preview
ACTYON SPORTS
Brand: SSANGYONG Pages: 14
Mazda 6 Sport Wagon Specification preview
6 Sport Wagon
Brand: Mazda Pages: 11
Toyota PC162-0K00H Installation Manual preview
PC162-0K00H
Brand: Toyota Pages: 5
Crux TDR-RVM32 Manual preview
TDR-RVM32
Brand: Crux Pages: 4
Toyota Bluetooth SWC Owner'S Manual preview
Bluetooth SWC
Brand: Toyota Pages: 212

Brands by name

Popular brands

Load more brands