Abarth Punto Owner'S Handbook Manual Download Page 157

Page: 157 / 271

153

KNOWING

YOUR VEHICLE

SAFETY

STARTING

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

❒

a compressor D-fig. 127 complete with pressure
gauge and connectors, located in the compartment;

❒

a pair of protective gloves located in the
compressor’s side compartment;

❒

adapters for inflating different elements.

You can also find the screwdriver and tow hitch in the
quick repair kit container (stored in the boot under the
carpet).

F0U129Ab

fig. 128

Hand the leaflet over to the staff who
have to manage the tyre treated using

the tyre repair kit.

WARNING

In the case of a puncture, caused by a
foreign body, tyres that have suffered
damage up to a maximum diameter of 4

mm on the tread or the shoulder can be repaired.

The kit cannot be used to repair damage
to the tyre sidewall. Do not use the quick

repair kit if the tyre is damaged from running on
a flat tyre.

WARNING

If the wheel rim is damaged (distortion
of the groove causing air leakage) it

cannot be repaired. Do not remove the foreign
body (screw or nail) from the tyre.

WARNING

151-182 PUNTO Abarth GB 1ed 17-07-2012 13:24 Pagina 153

Summary of Contents for Punto
















































































































































































































































































Search results

Summary of Contents for Punto

Reviews:

Related manuals for Punto

Brands by name

Popular brands

Abarth Punto, Owner'S Handbook Manual

Search results

Summary of Contents for Punto

Reviews:

Related manuals for Punto

Brands by name

Popular brands