Abarth Punto Owner'S Handbook Manual Download Page 104

Page: 104 / 271

100

KNOWING

YOUR VEHICLE

SAFETY

STARTING

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

NO ENGINE CUT-OUT CONDITIONS

With the device activated, for reasons of comfort,
limiting emissions and safety, the engine does not stop in
certain conditions, including:

❒

engine still cold;

❒

particularly cold outside temperatures, where the
appropriate indication is provided;

❒

battery not sufficiently charged;

❒

driver’s door not shut;

❒

driver’s seat belt not fastened;

❒

reverse gear engaged (for example, during parking
manoeuvres);

❒

automatic climate control is on and a comfortable
temperature has not yet been reached or MAX –
DEF function enabled;

❒

during the first period of use, to initialise the system.

In the above cases, a message appears in the display and
the warning light fig. 98 flashes in the instrument panel.

MANUAL ACTIVATION AND
DEACTIVATION

You can activate/deactivate the Start&Stop device by
pressing the button on the dashboard fig. 96.

When the device is active, the relevant warning light on
the instrument panel switches on fig. 97.

When the system is deactivated, the warning light on
the instrument panel switches on fig. 98.

The relevant device deactivation/activation messages
appear on the reconfigurable multifunction display.

fig. 98

If climate comfort is to be favoured, the
Start&Stop system can be disabled, for
a continuous operation of the climate

control system.

069-108 PUNTO Abarth GB 1ed 17-07-2012 12:08 Pagina 100

Summary of Contents for Punto
















































































































































































































































































Search results

Summary of Contents for Punto

Reviews:

Related manuals for Punto

Brands by name

Popular brands

Abarth Punto, Owner'S Handbook Manual

Search results

Summary of Contents for Punto

Reviews:

Related manuals for Punto

Brands by name

Popular brands