manualshive.com logo in svg

Abarth Punto, Owner'S Handbook Manual

The Abarth Punto Owner's Handbook Manual is the comprehensive guide you need to get the most out of your vehicle. This manual, available for free download at manualshive.com, provides detailed instructions, maintenance tips, and essential information to ensure optimal performance. Unlock the full potential of your Abarth Punto today!

Share
Download
background image

203

KNOWING

YOUR VEHICLE

SAFETY

STARTING 

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN 

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

SEATS AND FABRIC PARTS

Remove dust with a soft brush or a vacuum cleaner. It is
advisable to use a moist brush on velvet upholstery.

Rub the seats with a sponge moistened with a solution
of water and neutral detergent.

The fabric upholstery of your car is
designed to withstand normal wear and
tear for a long time. Some precautions

are however needed. Avoid prolonged rubbing
against clothing accessories, such as metal
buckles, Velcro strips and the like, which by
applying a high pressure on the fabric in a small
area could cause the breakage of some threads
and damage the upholstery.

LEATHER SEATS

(for versions/markets where provided)

Remove the dry dirt with a buckskin or slightly damp
cloth, without exercising too much pressure.

Remove any liquid or grease stains using an absorbent
dry cloth, without rubbing. Then clean with a soft cloth
or buckskin cloth dampened with water and neutral
soap.

If the stain persists, use specific products and observe
the instructions carefully.

IMPORTANT Never use alcohol. Make sure that the
cleaning products used contain no alcohol or alcohol
derivatives, even in small quantities.

183-204 PUNTO Abarth GB 1ed  17-07-2012  15:17  Pagina 203

Summary of Contents for Punto
















































































































































































































































































Reviews:

No comments

Related manuals for Punto

Yakima RoadShower 10G Quick Start Manual preview
RoadShower 10G
Brand: Yakima Pages: 12
Audi Q3 2015 - 2019 Technical Service Bulletin preview
Q3 2015 - 2019
Brand: Audi Pages: 12
Condor T-RAMP Quick Start Manual preview
T-RAMP
Brand: Condor Pages: 2
Whispbar K607W Fitting Instructions Manual preview
K607W
Brand: Whispbar Pages: 14
Ranger design 1525-FTR Installation Manual preview
1525-FTR
Brand: Ranger design Pages: 24
rough country 921107830 Installation Instruction preview
921107830
Brand: rough country Pages: 4
Saturn 2007 Ion Owner'S Manual preview
2007 Ion
Brand: Saturn Pages: 440
Mercedes-Benz CLS 2015 Operator'S Manual preview
CLS 2015
Brand: Mercedes-Benz Pages: 398
Saab 32000574 Installation Instructions Manual preview
32000574
Brand: Saab Pages: 9
Havis-Shields Telescoping Computer Base C-TCB-34 Install Instructions preview
Telescoping Computer Base C-TCB-34
Brand: Havis-Shields Pages: 1
PEUGEOT 106 2001 Owner'S Manual preview
106 2001
Brand: PEUGEOT Pages: 107
Master Tailgaters MR-43E2DVR1 User Manual preview
MR-43E2DVR1
Brand: Master Tailgaters Pages: 10
Whispbar WB201 Manual preview
WB201
Brand: Whispbar Pages: 14
Roadmaster Even Brake 9400 Owner'S Manual preview
Even Brake 9400
Brand: Roadmaster Pages: 20
Metra Electronics 99-3305 Installation Instructions Manual preview
99-3305
Brand: Metra Electronics Pages: 12
ECS Electronics TO-245-BHU Fitting Instructions Manual preview
TO-245-BHU
Brand: ECS Electronics Pages: 14
ZeroRPM IMS2 Operator'S Manual preview
IMS2
Brand: ZeroRPM Pages: 41
iDataLink ADS-BLADE AL Install Manual preview
ADS-BLADE AL
Brand: iDataLink Pages: 11

Brands by name

Popular brands

Load more brands