manualshive.com logo in svg

Abarth Punto, Owner'S Handbook Manual

The Abarth Punto Owner's Handbook Manual is the comprehensive guide you need to get the most out of your vehicle. This manual, available for free download at manualshive.com, provides detailed instructions, maintenance tips, and essential information to ensure optimal performance. Unlock the full potential of your Abarth Punto today!

Share
Download
background image

CDs

The presence of dirt, scratches or distortions on the
CDs may cause skipping while it is playing and poor
sound quality. For optimal playback conditions, follow
these guidelines:

❒

only use CDs with the following mark;

RADIO

223

❒

clean every CD thoroughly removing any fingermarks
or dust using a soft cloth. Hold CDs by the
circumference and clean them from the centre
towards the edge;

❒

never use chemicals (e.g. antistatics or thinners or
sprays) for cleaning as they may damage the surface of
the CDs;

❒

after listening place CDs back in their boxes to avoid
them from being damaged;

❒

do not expose CDs to direct sunlight, high
temperatures or moisture for long periods;

❒

do not stick labels on the CD surface or write on the
recorded surface with pencils or pens.

❒

do not use CDs that are very scratched, flawed,
distorted, etc. Using discs like these will result in
malfunctions or damage to the player;

❒

The use of original CD media is required for the best
quality audio production. Correct operation is not
guaranteed when CD-R/RW media are used that
were not correctly mastered and/or with a maximum
capacity above 650 Mb;

❒

Do not use commercially available protective sheets
for CDs or discs with stabilisers, etc. as they could
get stuck in the internal mechanism and damage the
disc;

❒

if a copy-protected CD is used, it may take a few
seconds before the system starts to reproduce it.
The CD player cannot be guaranteed to play all
protected discs. The fact that the CD is protected
from being copied is often shown in very small letters
or is just legible on the CD cover itself where it may,
for example, say “COPY CONTROL”, “COPY
PROTECTED”, “THIS CD CANNOT BE PLAYED
ON A PC/MAC”, or it may be identified through the
use of symbols, such as, for example:

❒

The CD player is capable of reading most
compression systems currently in use (e.g.: LAME,
BLADE, XING, FRAUNHOFER) but, following the
development of these systems, the reading of all
compression formats is not guaranteed.

221-258 PUNTO Abarth GB 1ed  17-07-2012  13:27  Pagina 223

Summary of Contents for Punto
















































































































































































































































































Reviews:

No comments

Related manuals for Punto

Yakima K800 Instructions Manual preview
K800
Brand: Yakima Pages: 8
Jacobsen Cushman Turf Truckster Parts & Maintenance Manual preview
Cushman Turf Truckster
Brand: Jacobsen Pages: 210
Atwood Lippert Components LEVELEGS MPD 66385 Manual preview
Lippert Components LEVELEGS MPD 66385
Brand: Atwood Pages: 6
BMW 65 41 2 152 528 Installation Instructions Manual preview
65 41 2 152 528
Brand: BMW Pages: 21
Kia Sportage 2018 Features & Functions Manual preview
Sportage 2018
Brand: Kia Pages: 54
Thule CIRCUIT 526XT Manual preview
CIRCUIT 526XT
Brand: Thule Pages: 12
EZTRUNK PHANTOM JK Assembly Manual preview
PHANTOM JK
Brand: EZTRUNK Pages: 3
VDO VIEWLINE 52 MM - MOUNTING 11-09 Installation Instructions preview
VIEWLINE 52 MM - MOUNTING 11-09
Brand: VDO Pages: 4
Hama 00 123530 Operating Instructions preview
00 123530
Brand: Hama Pages: 4
Volvo 1992 850 Service And Repair Manual preview
1992 850
Brand: Volvo Pages: 230
Improved Racing E5G-601 Instructions Manual preview
E5G-601
Brand: Improved Racing Pages: 17
Saab 9000 1985 Service Manual preview
9000 1985
Brand: Saab Pages: 92
A-rival PNC70 Active Hardware Manual preview
PNC70 Active
Brand: A-rival Pages: 23
N-Com Bluetooth Kit3 PLUS User Instructions And Safety preview
Bluetooth Kit3 PLUS
Brand: N-Com Pages: 36
SAFARI SS18HF Manual preview
SS18HF
Brand: SAFARI Pages: 5
Volvo 31339699 Installation Instructions, Accessories preview
31339699
Brand: Volvo Pages: 18
Honda 2000 Accord Sedan Online Reference Owner'S Manual preview
2000 Accord Sedan
Brand: Honda Pages: 320
Porsche 1972 911 Workshop Manual preview
1972 911
Brand: Porsche Pages: 1005

Brands by name

Popular brands

Load more brands