manualshive.com logo in svg

Abarth Punto, Owner'S Handbook Manual

The Abarth Punto Owner's Handbook Manual is the comprehensive guide you need to get the most out of your vehicle. This manual, available for free download at manualshive.com, provides detailed instructions, maintenance tips, and essential information to ensure optimal performance. Unlock the full potential of your Abarth Punto today!

Share
Download
background image

133

STOPPING THE ENGINE

Turn the ignition key to STOP while the engine is idling.

IMPORTANT After a taxing drive, you should allow the
engine to “catch its breath” before turning it off by
letting it idle to allow the temperature in the engine
compartment to fall. 

KNOWING

YOUR VEHICLE

SAFETY

STARTING 

AND DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN 

EMERGENCY

MAINTENANCE

AND CARE

TECHNICAL

SPECIFICATIONS

CONTENTS

A quick burst on the accelerator before
turning off the engine serves absolutely
no practical purpose, it wastes fuel and is

damaging especially to turbocharged engines.

F0U124Ab

fig. 124

PARKING THE VEHICLE

Proceed as follows:

❒

Stop the engine and engage the handbrake;

❒

Engage a gear (on a slope, engage first gear if the
vehicle is faced uphill or reverse if it is facing
downhill) and leave the wheels steered. 

Block the wheels with a wedge or a stone if the car is
parked on a steep slope. Do not leave the key in the
ignition switch to prevent draining the battery. Always
remove the key when you leave the vehicle.

Never leave children unattended in the
car. Always remove the ignition key

when leaving the car and take it with you.

WARNING

131-140 PUNTO Abarth GB 1ed  17-07-2012  13:20  Pagina 133

Summary of Contents for Punto
















































































































































































































































































Reviews:

No comments

Related manuals for Punto

Lancia Y Owner'S Handbook Manual preview
Y
Brand: Lancia Pages: 191
CITROEN PICASSO XSARA DESIRE 1.6 - MESUREMENT Manual preview
PICASSO XSARA DESIRE 1.6 - MESUREMENT
Brand: CITROEN Pages: 2
Compass 02106 Manual preview
02106
Brand: Compass Pages: 16
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
WABCO TP19108 Installation Manual preview
TP19108
Brand: WABCO Pages: 32
Chevrolet LUMINA 1997 Owner'S Manual preview
LUMINA 1997
Brand: Chevrolet Pages: 376
Mazda 2008 CX-9 Brochure & Specs preview
2008 CX-9
Brand: Mazda Pages: 15
Thule 1430 Kit Instructions Manual preview
1430 Kit
Brand: Thule Pages: 8
Hummer HX-T Owner'S Manual preview
HX-T
Brand: Hummer Pages: 31
POOL-LINE 110050 Assembly Instructions preview
110050
Brand: POOL-LINE Pages: 2
TracRac TracONE Installation Instructions Manual preview
TracONE
Brand: TracRac Pages: 8
AutoMaxi SUPRA 44 Montage preview
SUPRA 44
Brand: AutoMaxi Pages: 2
hager XEV1R22T2 Series Operating Instructions Manual preview
XEV1R22T2 Series
Brand: hager Pages: 14
HardWire HWP132A User Manual preview
HWP132A
Brand: HardWire Pages: 18
Chevrolet 2002 Silverado 1500 Pickup Owner'S Manual preview
2002 Silverado 1500 Pickup
Brand: Chevrolet Pages: 497
Honda 2013 Accord Coupe EX Technology Reference Manual preview
2013 Accord Coupe EX
Brand: Honda Pages: 20
Myenergi eddi 16A1P01H Installation Manual preview
eddi 16A1P01H
Brand: Myenergi Pages: 36
Jeep MOPAR GLADIATOR Manual preview
MOPAR GLADIATOR
Brand: Jeep Pages: 37

Brands by name

Popular brands

Load more brands