Aastra OpenPhone 73 User Manual Download Page 84 | Manualshive

Page: 84 / 140

background image

VoIP Telephones

82

3.

VoIP Telephones

VoIP stands for “Voice over IP” and refers to telephony where voice data is trans-
mitted via Internet Protocol (IP). VoIP enables companies to use existing company
data lines without having to lay new telephone lines. To be able to use this tech-
nology, however, suitable devices which support it are necessary.

The following IP system telephones are suitable, e. g. OpenPhone 73 IP and
OpenPhone 75 IP. These telephones offer the same range of functions that the
OpenPhone 73 and OpenPhone 75 standard system telephones offer and are
operated in exactly the same way. The number of keys and their functions and the
displays are the same for both the standard and the IP system telephones. Keypad
extensions can also be connected to IP system telephones (see also the chapter

Keypad Extensions

starting on page 31).

If your system administrator has configured an IP system telephone for you, the
following information will be of interest to you:

■

During some connections you may experience short breaks or hear an echo.
This depends on the transmission quality of the line and is not due to your tele-
phone functioning improperly.

■

If your telephone is being connected to the line or the connection is inter-
rupted (e. g. if the company network breaks down), the required terminal
software will be loaded when you reboot the telephone. This happens auto-
matically and may take about 1 minute. The telephone is ready for operation
when the display shows the time and the internal telephone number. Then you
may use the telephone as per usual.

■

When telephoning via connected headset, it is advisable to wait a second after
accepting an incoming call before you begin to speak. This brief time interval is
necessary to allow the VoIP connection to be established between yourself and
the caller.

IP System Telephone Ports

IP system telephones have additional ports not included with the standard system
telephones. Above the display on the back of the device there are two RJ45 jacks
for connecting the data line(s). These ports are labelled LAN and PC. Depending
on how your workstation is equipped technically, there are two options for con-
necting the IP system telephone. Your system administrator will connect the tele-

«
...
82
83
84
85
86
...
»

Summary of Contents for OpenPhone 73













































































































































Reviews:

No comments

Related manuals for OpenPhone 73

Brand: NEC Pages: 2

Brand: Samsung Pages: 108

Brand: ZEN Pages: 62

Brand: Raco Pages: 21

Brand: Micromax Pages: 22

Brand: Polycom Pages: 2

2100-TLL Landline 12v Tower

Brand: Rath Pages: 9

Arcata 28 CIP-D Seires

Brand: Teltronics Pages: 2

Brand: Sonim Pages: 89

Brand: NAPCO Pages: 16

Brand: AEI Pages: 5

Brand: Lava Pages: 36

Brand: Huawei Pages: 41

Brand: Huawei Pages: 74

Brand: Huawei Pages: 29

Brand: Huawei Pages: 112

Brand: Huawei Pages: 161

Brand: Zte Pages: 136

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands