Aastra OpenPhone 73 User Manual Download Page 36

Page: 36 / 140

OpenPhone 71/73/75 System Telephones

Using a Headset

Read the instructions for the headset in the user guide.

The headset can be used in combination with the handset and the other keys of
your system telephone (e. g. hands-free/open-listening key

). The following

table gives an overview of the different operating situations. The headset must be
switched on for these operations (see page 108).

Situation:

Operation:

Result:

You receive a call.

Press headset key

You telephone with the
headset (LED of the
key

is illuminated).

press call key

You want to make a call.

press headset key

and

enter the call

number

The call number is dialled
(LED of the key

illuminated).

press call key and

enter the call

number

and when necessary

press hands-free/

open-listening key

Hands-free/open-lis-
tening is switched on
(LED of the key

flashes).

You have entered a call
number (block dialling/
automatic dialling).

Press headset key

The call number is dialled
(LED of the key

illuminated).

press call key

and when necessary

press hands-free/

open-listening key

Hands-free/Open-lis-
tening is switched on
(LED of the key

flashes).

You are telephoning over
the handset and want to
switch to the headset.

Press the headset

key,

keep it pressed

and

replace the handset

You continue the call over
the headset (LED of the
key

is illuminated).

Summary of Contents for OpenPhone 73













































































































































Search results

Summary of Contents for OpenPhone 73

Reviews:

Related manuals for OpenPhone 73

Brands by name

Popular brands

Aastra OpenPhone 73, User Manual

Search results

Summary of Contents for OpenPhone 73

Reviews:

Related manuals for OpenPhone 73

Brands by name

Popular brands