Aastra OpenPhone 73 User Manual Download Page 46

Page: 46 / 140

Telephoning

In a hurry?: A Brief Explanation of Important Functions

2.1.7 Audio: Muting, Open-Listening, Adjusting

Telephone Volume

Muting

While using the phone, you may switch off the microphone if you wish. The person
you are speaking with will not be able to hear you:

Enabling Others to Listen In

Adjusting Volume

Press the muting key.
Press it once again to switch the microphone back on.

To allow others present to hear the telephone conversation,
press the hands-free/open-listening key.

By switching on the loudspeaker, you may continue your call
in hands-free mode.

L h

Keeping the hands-free/open-listening key depressed,
replace the handset in the telephone cradle. Then release
the hands-free/open-listening key.

G =

To adjust volume during a call, use the Plus/Minus key:

■

for handset volume

■

or – if you’re using a headset – for headset volume

■

or – if you have the loudspeaker switched on – for loud-
speaker volume.

This setting applies to the current call. To adjust volume per-
manently, please refer to the chapter

MenuCard “Phone Set-

tings”

starting on page 107.

Summary of Contents for OpenPhone 73













































































































































Search results

Summary of Contents for OpenPhone 73

Reviews:

Related manuals for OpenPhone 73

Brands by name

Popular brands

Aastra OpenPhone 73, User Manual

Search results

Summary of Contents for OpenPhone 73

Reviews:

Related manuals for OpenPhone 73

Brands by name

Popular brands